Description

Panasonic PT-RCQ80BE Laser DLP Projector Black

Panasonic PT-RCQ80BE is to create immersive environments with our most adaptable 1-Chip DLP laser projector with detailed images rich in natural color, seamless integration, and excellent 24/7 reliability.

Extracting even higher brightness from a projector that’s the same size as our award-winning PT-RZ120, the PT-RCQ10 Series is easy to handle and designed to reduce installation labor.

Panasonic PT-RCQ80BE supports uncompressed 4K signal input via HDMI or DIGITAL LINK terminals, streamlining playback of 4K sources and eliminating the need for video re-encoding. Combined with the new Smooth Pixel Drive 1-axis pixel-wobbling technology, support for Ultra HD signal playback creates highly detailed images beyond the projector’s panel resolution, ideal for 4K sources that demand especially precise and detailed on-screen reproduction.

Features

Laser 1-Chip DLP, 10,000 lumens (ANSI), WUXGA, 4K Ready laser projector
Rich Colour Harmonizer technology for improved and more accurate color reproduction
Accepts 4K signal input
Projects a 2175×1697 high-resolution image by using pixel shift technology
Maintenance-free up to 20,000 hours of maintenance-free operation with dust-resistant optical block and long-lasting laser engine
Compact, Lightweight, and Flexible Design
Original Imaging Engines Boost Color and Detail
Flexible Installation and Seamless Integration
Excellent Reliability with Dust-Resistant Lasers
Multi Monitoring & Control Software and Early Warning Software
Dynamic Light Control for High Contrast
Data-Cloning Function
Contrast Sync and Shutter Sync Function
Multi-Screen Support System

Specifications

General Specifications
Projector type	1-Chip DLP projector
DLP chip \| Display method	DLP chip x 1, DLP projection system
DLP chip \| Number of Pixels	8,000 lm / 8,400 lm (Center)
Light source	Laser diodes
Resolution	4,608,000 pixels / 2715 x 1697 dots With Smooth Pixel Drive: ON.
Screen size [diagonal] (mm)	1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio
Screen size [diagonal] (inch)	1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio
LENS	PT-RCQ80: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm
LENS	PT-RCQ80L: Optional powered zoom/focus lenses
Keystone correction range	Vertical: ±40° (±5° with ET-DLE020, ±16° with ET-DLE060, ±22° with ET-DLE105/ET-DLE085/ET-DLE055, +5° with ET-DLE035), Horizontal: ±15° (±10° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020)
Keystone correction range with optional ET-UK20 Upgrade Kit	Vertical: ±45° (±16° with ET-DLE060, ±40° with ET-DLE150/ET-DLE250/ET-DLE170, ±22° with ET-DLE105/ET-DLE085/ET-DLE055), Horizontal: ±40° (±10° with ET-DLE060, ±15° with ET-DLE105/ET-DLE085/ET-DLE055), When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55°.
Installation	Ceiling/floor, front/rear, free 360-degree installation
Terminals \| SDI IN	BNC x 1: 3G/HD-SDI input
Terminals \| HDMI IN	HDMI 19-pin x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input )
Terminals \| DVI-D IN	DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
Terminals \| MULTI PROJECTOR SYNC IN	BNC x 1
Terminals \| MULTI PROJECTOR SYNC OUT	BNC x 1
Terminals \| SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| SERIAL OUT	D-sub 9-pin (male) x 1 for link control
Terminals \| REMOTE 1 OUT	M3 x 1 for link control (for wired remote control)
Terminals \| REMOTE 2 IN	D-sub 9-pin (female) x 1 for external control (parallel)
Terminals \| LAN	RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink (Class 2), Art-Net
Terminals \| Expansion Slot	Open slot for SLOT NX compatible interface board
Power supply	AC 100-240 V, 50/60 Hz
Power consumption	1,100 W
Cabinet materials	Molded plastic
Operation noise	40 dB (Normal)/38 dB (Quiet)
Operating environment	Operating temperature: 0–45 °C (32–113 °F) , operating humidity: 10–80 % (no condensation)
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android
Note	1. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is the average of all products when shipped. 2. Average light-output value of all shipped products measured at the center of the screen in NORMAL Mode. 3. Around this time, the light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, [Dynamic Contrast] set to [3], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. The estimated time until light output declines to 50 % varies depending on the environment. 4. Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE035. 5. 4K input signals are resized to 2715 x 1697 pixels upon projection. (With Smooth Pixel Drive: ON) 6. With legs at the shortest position. 7. Average value. It May differ depending on the actual unit. 8. When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector. 9. When optional AJ-WM50 wireless module is attached, the operating temperature range becomes 0–40 °C (32–104 °F).
Terminals \| REMOTE 1 IN	M3 x 1 for wired remote control
Contrast Ratio	10,000:1 (Full On/Full Off) With [Dynamic Contrast] set to [3]
Terminals \| USB	USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA)
Center-to-corner zone ratio	90%
Terminals \| DIGITAL LINK	RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT compliant), 100Base-TX, compatible with Art-Net, PJLink (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input
Time until light output declines to 50 %	20,000 hours (NORMAL) / 24,000 hours (ECO)
Lens shift \| Vertical (from center of screen)	+50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered)
Lens shift4 \| Horizontal (from the center of the screen	+30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered)
Weight	PT-RCQ80: Approx. 24.2 kg (53.4 lbs) (with supplied lens)
Weight	PT-RCQ80L: Approx. 23.4 kg (51.6 lbs) (without lens)
Light output	10,000 lm / 10,500 lm (Center)
Dimensions (W x H x D)	PT-RCQ80: 498 x 2006 x 581 mm (19 19/32˝ x 7 7/8˝ 6 x 22 7/8˝ ) (with supplied lens)
Dimensions (W x H x D)	PT-RCQ80L: 498 x 2006 x 538 mm (19 19/32˝ x 7 7/8˝ 6 x 21 3/16˝ ) (without lens)
DLP chip \| Panel size	17.0 mm (0.67 in) diagonal, 16:10 aspect ratio

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

How to shop TAX free in Singapore

8% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall GST Refund Centre before departure with goods within 60 days from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme’s conditions and eligibility criteria can claim for the GST refund. Visit the following link for GST Guide for Visitors on Tourist Refund Scheme. https://www.iras.gov.sg/taxes/goods-services-tax-(gst)/consumers/tourist-refund-scheme

All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.

Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.

Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.

Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.

Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.

If you have other inquiries for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)