AJA IPR-10G2-HDMI Bridging HD SMPTE ST 2110 Video and Audio to HDMI

/
/
AJA IPR-10G2-HDMI Bridging HD SMPTE ST 2110 Video and Audio to HDMI

SKU: IPR-10G2-HDMI Category:
AJA

Description

AJA IPR-10G2-HDMI Mini Converter

AJA IPR-10G2-HDMI provides monitoring of UltraHD and HD SMPTE 2110 signals across 10 GigE to an HDMI output. It receives SMPTE ST 2110 over 10 GigE connectivity and formats the data, including UltraHD or HD video on a full-size HDMI interface. Associated audio from the video stream is extracted, synchronized, and embedded into the HDMI interface and also output on an analog RCA interface.

The IPR-10G2-HDMI features 2x 10 GbE SFP+ cages allowing hitless switching and providing redundancy protection for critical distribution and monitoring applications.

The IPR-10G2-HDMI also offers 1x Reference In via BNC. This makes it ideal for integrating into existing baseband environments such as master control, a truck, or an edit suite.

Monitor ST 2110 Video and Audio from anywhere on the Network.

The IPR-10G-HDMI is an SMPTE ST 2110 to HDMI Mini-Converter suited for point-of-use applications including source monitoring and an HDMI feed to compatible devices.

The AJA IPR-10G-HDMI receive SMPTE?ST 2110 IP video and audio, then formats the data for output on a full-size HDMI 1.4b interface.

With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router, or edit bay.via IP and provide HDMI monitoring at the destination.

The audio associated with the video stream is extracted, synchronized, and then embedded into the HDMI interface as well as output on an analog RCA interface.

Workflow

AJA IPR-10G2-HDMI WorkFlow

IPR-10G2-HDMI provides HDMI output from SMPTE ST 2110 video and audio over IP streams. Combine your IPR-10G2-HDMI units with AJA KONA IP for HD(I/O card for use in desktop workstations) or receive UltraHD?or HD from servers and more to instantly create a real-world ST 2110 workflow for video over IP production and monitoring.

User Control

IPR-10G2-HDMI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB?connector facilitates quick and simple initial network configuration and firmware updates.

  • 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
  • HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
  • Web and REST clients supported
  • 1x USB 2.0 Mini-B (IEC 62680-1) connector
  • AJA eMini-Setup of network parameters

Additional information

Weight 1.5 kg

Features

  • SMPTE 2110 audio, and video receiver
  • Rugged, quiet, fanless design
  • 2x 10 GigE SFP+ cages for media LAN (providing support for “hitless switching” up to 1080 60p) with status light
  • 1x 1 GigE RJ-45 socket for control LAN with status light
  • Dedicated HDMI receiver with full size (standard type A) HDMI 1.4b (24/30-bits per pixel) output up to HD 60p, 4:2:2, 10-bit, YCbCr/RGB, or UltraHD 30p, 4:2:2, 8-bit, YCbCr, or UltraHD 50p, 4:2:0, 8-bit, YCbCr
  • Embedded HDMI audio output (up to eight channels)
  • 2x RCA analog audio output (simultaneous with HDMI audio)
    Reference In connector to enable locking sync of baseband output for the local environment
  • System Modes to enable quick setup for lowest latency / highest protection, etc.
  • Web browser accessible setup and control interface, via built-in web server
  • 1x mini-USB port providing an alternate method of initial network configuration with AJA eMini-Setup software
  • NMOS and Ember+ support
  • USB keyboard control for quick and easy preset recalls
  • Customizable control with AJA REST API
  • Five-year warranty

Specifications

Video Formats
  • (UltraHD) 3840x2160p 23.98, 24, 25, 29.97, 30, 50
  • (HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (HD) 1920x1080i 50, 59.94
  • (HD) 1280x720p 50, 59.94, 60
  • (SD) 625i 50
  • (SD) 525i 59.94
Video Quality
  • Up to 1080 60p, 4:2:2, 10-bit, YCbCr/RGB uncompressed
  • Up to UltraHD 30p, 4:2:2, 8-bit, YCbCr uncompressed
  • Up to UltraHD 50p, 4:2:0, 8-bit, YCbCr uncompressed
Discovery, Registration, and Control
  • NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
  • Ember+ control (no discovery, control only)
  • AJA REST API control (discovery via SSDP or MDNS)
  • LLDP (Link Layer Discovery Protocol)
  • Supported over dedicated management Ethernet port and in-band over media ports
Media Transport Interfaces
  • SMPTE ST 2110 (-10, -20, -21, -30)
    • 2x SFP+ Cages – SFPs not included
  • Recommended 10 GigE SFP+ modules:
    • Arista Networks SFP-10G-SR Compatible 10GBASE-SR
    • Fiberstore SFP-10GSR-85 10G SFP+ 850nm
    • Finisar FTLX1471D3BCL (for single mode 1310nm)
    • Mellanox MFM1T02A-SR 850nm 10G
Video Input IP
  • SMPTE ST 2110
    • Single-channel video input up to UltraHD
    • SMPTE ST 2022-7 dual stream input for hitless switching*
    • Rx support for Narrow/Wide, Gapped/Linear Modes
Audio Input IP
  • SMPTE ST 2110
    • Up to 16-channels* audio, 24-bit per channel, 48 kHz synchronous
    • 1 ms or 125 µs packet interval

*Streams with up to 16-channels are received but only the first 8 are output

Video Output Digital 1x HDMI Standard Type A connector

  • HDMI v1.4b 24/30-bits per pixel
  • Frame syncing to facility clock*
  • Concealment of errors due to packet loss
Audio Output Digital Up to 8-channel, HDMI embedded audio, 24-bit per channel, 48 kHz synchronous
Audio Output Analog
  • 2x RCA analog audio
    • Levels at -10 dBu (nominal)
Reference
  • 1x BNC
    • Analog/tri-level reference input
    • Allows baseband output of IPR-10G2-HDMI to be locked to the facility baseband clock
IP Clock
  • PTP support compliant with PTP PTPv2, PTPv3 / IEEE 1588-2008
  • SMPTE ST 2059-1 compliant
User Interface
  • 1x RJ-45 for 10/100/1000 Base-T Ethernet
    • Web and REST clients supported for remote network setup and configuration
  • 1x USB 2.0 Mini-B connector
    • AJA eMini-Setup supported for network setup and configuration via a local desktop computer
  • Web and REST configuration is also supported in-band over media ports
Size (w x d x h) 5.07″ x 0.94″ x 5.06″ (128.8 x 23.9 x 128.4 mm)
Weight 0.6 lb (0.3 kg)
Power 5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)
Environment
  • Safe Operating Temperature: 0 to 40 C (32 to 104 F)
  • Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
  • Operating Relative Humidity: 10-90% non-condensing
  • Operating Altitude: <3,000 meters (<10,000 feet)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

How to shop TAX free in Singapore

8% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall GST Refund Centre before departure with goods within 60 days from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme’s conditions and eligibility criteria can claim for the GST refund. Visit the following link for GST Guide for Visitors on Tourist Refund Scheme. https://www.iras.gov.sg/taxes/goods-services-tax-(gst)/consumers/tourist-refund-scheme


All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.

Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.

Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.

Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.

Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.

If you have other inquiries for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)

Related Products

Enquiry Cart