Clear-Com FSII-BP24 FreeSpeak II 2.4 GHz Wireless Intercom Beltpack

 Clear-Com FSII-BP24 FreeSpeak II 2.4 GHz Wireless Intercom Beltpack

SKU: N/A Category:


Clear-Com FreeSpeak II 2.4 GHz Digital Wireless Beltpack

Clear-Com FSII-BP24 is a rugged, water-resistant beltpack that operates in the ISM license-free 2.4 GHz frequency range. Featuring the “Clear-Com Sound”, the FSII-BP24 has high audio bandwidth for superior intelligibility and listening comfort.

Additional information

FSII-BP24 FreeSpeak II 2.4 GHz Wireless Beltpack

FreeSpeak II 2.4 GHz FSII-BP24-X4-EU, FreeSpeak II 2.4 GHz FSII-BP24-X5-EU, FreeSpeak II 2.4 GHz FSII-BP24-X7-EU


  • Functions with FSII base, FreeSpeak Edge base, Arcadia Central Station, E-IPA-HX card, and FSII splitter hardware
  • Typical indoor range: 300 ft (90m), outdoor range: 800 ft (240m)
  • 1.9 and 2.4 GHz beltpacks operate on a single system
  • Up to 65 – 90 beltpacks on a single system
  • “Listen Again” message replay
  • The simple 2-channel party-line operation to 5-channel intercom on the same beltpack
  • Over-the-air beltpack registration
  • 18+ hour battery life or USB port for continuous operation
  • XLR-4M headset connector
  • IP53 rating for wet and dusty conditions
  • Built-in flashlight


Audio Bandwidth 200Hz-7.5KHz
No. of Full-Duplex Audio Paths Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls, and a main volume
Mode of Operation Full-duplex on all routes
Level/Talk Controls 4 pushbuttons, a reply button, and 2 rotary controls
Enter/Answer-Back Button 1
Frequency Spectrum 2.400-2.483MHz for EU and US cellular auto roaming technology
Modulation GFSK, TDMA frame 10ms full and long slot
Output power (EU) 18-22dBm, (US) 18-20dBm
Range Typical indoor range 300ft (90m), outdoor range 800ft (240m)
Battery Li-Ion or 3 AA alkaline cells
Battery Charging Drop-in charger (AC60) or local USB
Battery Life 18+ hours with Li-Ion; 9 hours with 3 x Alkaline AA cells
Headset Connector 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT
Headset Voltage Maximum of ~+8dBu as set by firmware
Microphone Type Electret and Dynamic, selectable in beltpack menu
Microphone Voltage Electret Mic:-45dBu (additional 2.5V DC bias voltage positive on Pin 2 and negative on Pin 1 via a 1k resistor).
Headset Limiter Selectable from beltpack menu
IP53 water and dust resistance
Operating 32º-125ºF (0º-50ºC)
Storage 32º-150ºF (0º-70ºC)
Humidity Between 20% and 90%, Non-Condensing Atmospheric pressures of 5.1 atm or 75 psi
Dimensions Tapered design at largest points
3.75 x 5 x 1.5 in (HxWxD)(97 x 130 x 45mm)
Weight 9.0 oz (0.25 kg) including batteries


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

Quote Cart