|
SPECIFICATIONS |
|
DFS-900M Processor Unit |
|
General |
|
Power requirements |
100 to 240 V AC, 50/60 Hz |
|
Power consumption |
400 W (when the maximum number of
optional boards are installed) |
|
Operating temperature |
5ºC to 40ºC (41ºF to 104ºF) |
|
Dimensions (W/H/D) |
440 × 132 × 445 mm ( 17 3/8 × 5
1/4 × 17 5/8 inches) |
|
Mass |
17.3 kg (38 lb 2 oz) (not
including any optional product) |
|
Signal processing |
|
Television system |
1080/59.94i, 1080/50i, 720/50p,
720/59.94p, 480/59.94i, 576/50i |
|
Signal processing system |
4:2:2:4 digital component |
|
Quantization bits |
Y: 10 bits, C: 10 bits, KEY: 10
bits |
|
Input/output delay |
1 H (when the frame synchronizer
is OFF) |
|
Inputs/Outputs |
|
Video input |
BNC (x8), 800 mVp-p, 75 Ω
HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SD-SDI: 270 Mbps
The frame synchronizer function is built in for all the inputs. |
|
Reference input |
BNC (x2), 75, loop-through (An
external 75-ohm terminator is required.)
BB: NTSC 0.429 Vp-p, PAL 0.45 Vp-p (Tri-level sync: ±0.3 Vp-p is
available
for HD mode.) |
|
Video output |
BNC (x4), 800 mVp-p, 75 Ω
HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SD-SDI: 270 Mbps |
|
Reference output |
BNC (x1), 75 Ω
BB: NTSC 0.429 Vp-p, PAL 0.45 Vp-p (Tri-level sync: ±0.3 Vp-p is
available
for HD mode.) |
|
Interfaces |
|
REMOTE |
D-sub 9-pin (x3), female |
|
EDITOR |
D-sub 9-pin, female |
|
GPI IN |
D-sub 25-pin, female, 16 inputs |
|
TALLY/GPI OUT |
D-sub 37-pin, female, 32 outputs |
|
PANEL |
RJ-45 type |
|
Supplied accessories |
| |
Control cable (shielded cross
cable complied with IEEE 802.3 Ethernet
100BASE-TX standards, for connection between the Processor Unit
and
Control Panel) (1)
Operating Instructions (1) |
| |
|
BKDF-901 1M/E Control Panel |
|
General |
|
Power requirements |
100 to 240 V AC, 50/60 Hz |
|
Power consumption |
28 W |
|
Operating temperature |
5ºC to 40ºC (41ºF to 104ºF) |
|
Dimensions (W/H/D) |
430 × 110.1 × 221 mm (17 × 4 3/8
× 8 3/4 inches) |
|
Mass |
4.4 kg (9 lb 11 oz) |
|
Interface - Operating panel |
|
USB MEMORY |
High Speed USB (USB2.0) Type-A |
|
Interface - Rear panel |
|
EXT DISPLAY |
High Density D-sub 15-pin, female |
|
DEVICE |
High Speed USB (USB2.0) Type-A |
|
PROCESSOR |
RJ-45 |
| |
|
BKDF-902 1.5M/E Control Panel |
|
General |
|
Power requirements |
100 to 240 V AC, 50/60 Hz |
|
Power consumption |
68W |
|
Operating temperature |
5ºC to 40ºC (41ºF to 104ºF) |
|
Dimensions (W/H/D) |
599 × 120.8 × 399 mm (23 5/8 × 4
7/8 × 15 3/4 inches) |
|
Mass |
10.4kg (22 lb 15 oz) |
|
Interface - Operating panel |
|
USB MEMORY |
High Speed USB (USB2.0) Type-A |
|
Interface - Rear panel |
|
EXT DISPLAY |
High Density D-sub 15-pin, female |
|
DEVICE |
High Speed USB (USB2.0) Type-A |
|
PROCESSOR |
RJ-45 |
 |