|
|
|
Sony HDC-900, Multi-Format HD Color Camera |
|
The HDC-900 is capable of capturing 1080 24/25/30 frame progressive or 50/60
interlace images, as well a 480 60 progressive. 720P captures requires the
additional HDCU-903 line converter board that resides in the HDCU-900 Camera
control unit. . The HDC-900 employs a 2.2 million "square" pixel CCD imager,
12-bit AD and a two million gate VLSI for up to 34 bit processing. The HDC-900
requires either the HDVF-700A 7' monochrome CRT viewfinder or HDVF-C700W 6" LCD
viewfinder. The HDCU-900 Camera Control Unit is optional. |
 |
|
Highlights |
- Multi-purpose studio/OB camera capable of
both high-end HDVS and SDTV operations
- Incorporates three 2/3-inch type 16:9 FIT
CCD imagers each with 2,200,000 pixels that conform to 1920(H) x 1080(V) CIF
(Common Image Format)
- Can be switched to originate the CIF
format at 24P, 25P or 30P progressive scan frame rates, or at 50i and 60i
interlaced field rates
- Standard definition also available:
480/60i and 480/30P in widescreen or 4:3 mode, or 576/50i and 576/25P in 4:3
mode
- Full digital processing with12-bit A/D
converter and Advanced Digital Signal Processor (ADSP) for excellent picture
quality
- Excellent signal-to-noise ratio of 54dB
- Wide dynamic range of 600 %
- High sensitivity of F10 at 2000 lx
- High horizontal resolution of 1000 TV
lines
- Automatic set-up
- Five position ND filter and CC filter
|
- Electronic shutter function
- Clear Scan and Extended Clear Scan (in
interlaced modes only)
- Three-channel Skin Tone Detail Correction
- Variable linear matrix
- Memory Stick function to store and recall
personal camera setup parameters and VF settings
- Fully compatible with Sony's New
Generation Camera Control Units
- Optical fiber transmission system enables
high quality video transfer at a long distance
- Advanced filing system with MSU-700A/750
- Low profile body design
- Viewfinder lock system
- VF menu display
- Various display functions on viewfinder
such as box cursor, center marker and safety zone
- Rotary type optical fiber connector
- Both HD lens and NTSC lens can be used
|
|
Specifications: |
|
Operating temperature: |
-20 °C to 45 °C (-4 °F to 113 °F)
|
|
Storage temperature: |
-20 °C to 50 °C (-4 °F to 122
°F) |
|
Mass: |
Approx. 21kg (46 lb 5oz) (main
unit only) |
|
Imager: |
2/3-inch type frame interline
transfer CCD |
|
Method: |
3-CCD, RGB |
|
Effective resolution: |
1920 (H) ×1080 (V) |
|
Spectral system: |
fl.4 prism |
|
Built-in filters: |
Color temperature conversion
filters: A: cross filter , B: 3200K (clear) , C: 4300K , D:
6300K , E: 8000K. ND filters: 1: clear , 2: 1/4 ND , 3: 1/8 ND ,
4: 1/16 ND , 5: 1/64 ND . |
|
Sensitivity: |
F10.0 (at 2000 lx with 89.9%
reflectivity) |
|
Image signal-to-noise ratio:
|
54 dB or more |
|
Horizontal resolution:
|
1000 TV lines (at center of
screen) ,45 +10/-5% (27.5 MHz) |
|
Registration: |
0.02% for total area (not
including lens distortion) |
|
Geometric distortion: |
Negligible (not including lens
distortion) |
|
|
|
Input connectors:
- DC IN (4-pin) x 1
- RET CONTROL (6-pin) x 1
- AUDIO IN CH-1, CH-2 (XLR
3-PIN, male (1 each) :For
MIC: -60 dBs (may be selected to -20 dBs by view finder menu
or HDCU-900 operations), balanced , For LINE: -20 dBs,
balanced
Output
connectors
- TEST OUT (BNC type) x 1
:1.0 Vp-p, 75 Ω terminated
- PROMPTER (BNC type) x 1
:1.0 Vp-p, 75 Ω terminated
- AC OUT (100V AC) x 1
- HD SERIAL OUT 1.5 Gb/s x
1
- VF (D-sub 25-pin) x 1
- DC OUT (4-pin) x 1 :DC
12V, 5W
|
Input/output
connectors
- CCU (Electro-optical
connector ) x 1
- VTR (26-pin) x 1
- TRACKER (20-pin) x 1
- REMOTE (8-pin
multi-connector x 1
- INTERCOM 1 and 2 (XLR
5-pin) x 1
|
|
|
|
Supplied Accessories: |
|
Angle adjustment brackets (2)
Front
cover (1)
Number plates for
up tally (1)
Number plates for
side panel (2)
Number plates for
back tally (1)
Cable clamp (2)
Operation
manual (1)
Installation &
maintenance manual (1) |
|
|
 |
|
