|
|
|
AZDEN Microphone Parts |
|
[Image not Available] |
LAPEL MIC CLIP
Replacement Lapel mic clip for the EX-503
(H), EX-505 (H), and EX-503L (H) lavalier mics. This is the clip that replaces
the one that comes with the WM-PRO and all other Azden systems that come with an
Azden lavalier microphones. |
 |
ECM-44
Replacement microphone - ECM-44, Sony omni-lapel microphone with a wired 3.5mm
plug. This electret condenser microphone requires a bias voltage of 5-9VDC which
all Azden bodypack transmitters provide. |
|
Model:
LAPEL MIC CLIP |
Azden_Replacement_Parts">Email
Us |
Model:
ECM-44 |
Azden_Replacement_Parts">Email
Us |
 |
 |
ECM-44H
Replacement microphone - ECM-44H, Sony omni-lapel microphone with a wired 4-pin
connector for most UHF body-pack transmitters. This electret condenser
microphone requires a bias voltage of 5-9VDC which all Azden bodypack
transmitters provide. |
[Image not Available] |
EX-413 Omni hand-
Replacement microphone - EX-413 omni hand-held microphone with a wired 3.5mm
plug. |
|
Model:
ECM-44H |
Azden_Replacement_Parts">Email
Us |
Model:
EX-413 |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
EX-503 Omni lapel
Replacement microphone - EX-503 omni lapel microphone with 3.5mm plug. This
electret condenser microphone requires a bias voltage of 5-9VDC which all Azden
bodypack transmitters provide. |
 |
EX-503H Omni lapel
Replacement microphone - EX-503H omni lapel microphone with a 4-pin connector
for most UHF bodypack transmitters (not the 10BT which uses the EX-503 with
3.5mm connector). This electret condenser microphone requires a bias voltage of
5-9VDC which all Azden bodypack transmitters provide. |
|
Model: EX-503 |
Azden_Replacement_Parts">Email
Us |
Model: EX-503H |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
EX-503L Lavalier
Microphone
The same as the EX-503, but with a screw-down
locking connector. Designed to be used with the 10BT, 15BT, 30BT, 35BT and 32BT
bodypack. This electret condenser microphone requires a bias voltage of 5-9VDC
which all Azden bodypack transmitters provide. |
[Image not Available] |
EX-505U
Replacement microphone - EX-505U, uni-directional lapel microphone wired with a
3.4mm plug. This electret condenser microphone requires a bias voltage of 5-9VDC
which all Azden bodypack transmitters provide. |
|
Model: EX-503L |
Azden_Replacement_Parts">Email
Us |
Model: EX-505U |
Azden_Replacement_Parts">Email
Us |
|
|
 |
EX-505UH
Replacement microphone - EX-505UH, uni-directional lapel microphone wire with a
4-pin connector for most UHF body-pack transmitters. This electret condenser
microphone requires a bias voltage of 5-9VDC which all Azden bodypack
transmitters provide. |
[Image not Available] |
Ball-screen
Replacement microphone ball-screen for 31HT |
|
Model:
EX-505UH |
Azden_Replacement_Parts">Email
Us |
Model:
Ball-screen |
Azden_Replacement_Parts">Email
Us |
|
|
 |
EX-553
Omni directional microphone Cable length: 90cm
Windscreen is replaceable
Connector:Locking type mini-plug |
 |
EX-553(H)
Omni directional microphone with Hirose connector Cable length: 90 cm Windscreen
is replaceable Connector:Hirose |
|
Model:
EX-553 |
 |
Model:
EX-553(H) |
|
|
|
 |
ASP-18901
Audio out cable for 330UPR
Locking type mini plug(stereo)
on the receiver with dual audio
out adapter on the camera side |
 |
ASP-15609
Audio out cable
Locking type mini plug(stereo)
on the receiver with no locking mini plug(stereo) on the camera side |
|
Model:
ASP-18901 |
Azden_Replacement_Parts">
Email Us |
Model:
ASP-15609 |
Azden_Replacement_Parts">
Email Us |
|
|
 |
ASP-20301
Carrying case for 310UDR/330UPR |
 |
BC-29
Recharging adapter for 330UPR |
|
Model:
ASP-20301 |
Azden_Replacement_Parts">
Email Us |
Model:
BC-29 |
Azden_Replacement_Parts">
Email Us |
|
|
|
[Image not Available] |
Ball-screen
Replacement microphone ball-screen for 41HT and 51HT. |
[Image not Available] |
Ball-screen
Replacement microphone ball-screen for WM/T-PRO |
|
Model: Ball-screen |
Azden_Replacement_Parts">Email
Us |
Model:
Ball-screen |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
Switch-cover
Replacement On/Off switch cover for 31HT |
[Image not Available] |
Switch-cover
Replacement On/Off switch cover for 51HT and 41HT. |
|
Model: Switch-cover |
Azden_Replacement_Parts">Email
Us |
Model: Switch-cover |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
Switch-cover
Replacement On/Off switch cover for WM/T-PRO |
[Image not Available] |
Shoe-Mount
Replacement shoe-mount for ECZ-990 and the SMX-10 |
|
Model: Switch-cover |
Azden_Replacement_Parts">Email
Us |
Model: Shoe-Mount |
Azden_Replacement_Parts">Email
Us |
 |
|
[Image not Available] |
Shoe-Mount
Replacement shoe-mount for
SGM-X only. |
 |
Shotgun accessories
Replacement shotgun accessories - SMH-1 fits the SGM-1X, SGM-2X and SGM-1000. |
|
Model: Shoe-Mount |
Azden_Replacement_Parts">Email
Us |
Model:
Shotgun accessories |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
Battery holder
Replacement battery holder for the SGM-X |
[Image not Available] |
Extention barrel
Replacement extention barrel for SGM-2X. Needed to use the microphone as a
super-cardiod shotgun. |
|
Model: Battery holder |
Azden_Replacement_Parts">Email
Us |
Model:
Extention barrel |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
Omni barrel
Replacement short omni-directional barrel for the SGM-2X. |
[Image not Available] |
Rubber ring
Replacement shotgun accessories -Replacement rubber rings for the SMH-1. Package
of 2 |
|
Model: Omni barrel |
Azden_Replacement_Parts">Email
Us |
Model: Rubber ring |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
Windscreen
Replacement windscreen for CM-20 and/or CM-20H. |
[Image not Available] |
Windscreen
Replacement windscreen for the SMX-10 and/or ECZ-990 2-position mini-shotgun
microphone. |
|
Model: Windscreen |
Azden_Replacement_Parts">Email
Us |
Model: Windscreen |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
Windscreen
Replacement windscreen for EX-503, EX-503H,
EX-503L, EX-505U, EX-505UH, HS-9 and HS-9H. |
[Image not Available] |
Replacement windscreen for HS-11, HS-11H, HS-12
and/or HS-12H |
|
Model:
Windscreen |
Azden_Replacement_Parts">Email
Us |
Model:
Windscreen |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
Windscreen
Replacement windscreen for SGM-1000,
SGM-1X and SGM-X. |
[Image not Available] |
Windscreen
Replacement windscreen for SGM-2X (long). |
|
Model:
Windscreen |
Azden_Replacement_Parts">Email
Us |
Model: Windscreen |
Azden_Replacement_Parts">Email
Us |
|
|
|
[Image not Available] |
Windscreen
Replacement windscreen for SGM-2X (short). |
|
|
|
Model: Windscreen |
Azden_Replacement_Parts">Email
Us |
|
|
|
