|
|
|
GN 15 (30,50) E |
|
|
-E.jpg)
Product Code:
gn153050e
 |
All E-Series
modules come with an integrated connector for quick setup and
takedown. The goosenecks are available in various lengths. GN 15
E: 23.5 cm (9.2 in.); GN 30 E: 38 cm (15 in.); GN 50 E: 57.2 cm
(22.3 in.). Of course the series also has an integrated 200 Hz
bass rolloff filter and LED ON/OFF jumper.
Optimum suppression of structure-borne noise
An essential feature of the installation hardware described
below is the attenuation of structureborne noise that prevents
the transmission of unwanted noise (footfall etc.). The amount
of attenuation is determined by the material mix of the rubber
shock mount. Modular Series installation modules usea mixture
that is extremely efficient at frequencies below 200 Hz (e.g.,
knocking noise). Unlike standard rubber mixturees that respond
to vibrations very slowly, the special AKG rubber mixture
absorbs vibrations practically immediately. This prevents
successive shocks from adding up. This rubber mixture is used in
the H 600 and H 500. |
|
|
GN15(30,50)E Features |
- Rugged construction
- Highly reliable contacts for capsule modules
- Integrated LED ring status indicator
|
- Integrated, switchable bass cut
- Integrated XLR connection
|
|
|
GN15(30,50)E Specifications |
- Bass filter: 250 Hz, -10 dB at 50 Hz
- Impedance: <=600 ohms
- Recommended load impedance: >=2,000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN/IEC
- Powering: <3 mA
- Connector: 3-pin male XLR
|
- Finish: matte dark grey
- Net weight: GN 15 E: 112 g (3.9 oz.), GN 30 E: 160 g (5.6 oz.),
GN 50 E: 160 g (5.6 oz.)
- Shipping weight: GN 15 E: 396 g (13.9 oz.), GN 30 E: 530 g (18.7
oz.), GN 50 E: 535 g (18.8 oz.)
|
|
|
GN15(30,50)E Standard
Accessories
|
|
|
- PS 3 F-Lock, Installation hardware
|
|
|
|
